At this stage, ultra-pure water machines are widely used in laboratories, to show I, II, and III grades of purified water for laboratories, and the requirements for experimental tap water are very high, which makes ultra-pure water machines look even more critical. In the application of machinery and equipment, some problems are unavoidable. The ultrapure water machine has the function of stopping water leakage, which can prevent water seepage reasonably. So what is the reason for the water seepage of the purified water equipment?
1. Incorrect installation of ultrapure water machine accessories
The ultra-pure water machine is composed of many parts. If there is a water seepage condition, it is very likely that the parts have problems in the assembly. If such a situation occurs, it is best to refer to the instructions for use and re-check the parts of the ultra-pure water machine. Carry out arrangement and assembly. All normal installation steps are not easy to produce water seepage conditions!
2. The rubber ring on the filter housing is not installed properly
The filter housing is made of plastic materials. If it is directly connected, it will cause water seepage failure. Generally, the filter housing will be equipped with a flexible rubber ring to assist in fixing it. The water seepage of the ultrapure water machine may be caused by the improper installation of the rubber ring on the filter housing, and the inseparable connection of the filter housing may cause the problem of water seepage. Solution: Find the rubber ring, fix it to the socket of the filter housing, and then install the filter housing!
3. The water pipe is not plugged in or leaking
The function of the water pipe in the ultra-pure water machine is to assist in the transportation of water resources. When connecting the internal filter element of the ultra-pure water machine, the quick-plug connector is basically used to assist the connection. If there is water seepage inside the ultra-pure water machine, the connection between the water pipe and the connector can be checked. Not enough is inseparable. If there is a problem here, it is best to add a pipe cutter to cut the top of the water pipe head flush, and then connect it to the top of the joint and drive it a few more times to prevent water seepage!
Don’t worry if the ultra-pure water machine has water seepage. Open the shell of the ultra-pure water machine to check where the water seepage occurs. If it is the three conditions, use the plan to deal with it. If you can’t handle it, it’s best to immediately Ask the store for after-sales service to solve it.
