As a supplier of double RO DI water systems, understanding the recommended water quality for system input is crucial. A double RO (Reverse Osmosis) DI (Deionization) water system is designed to produce high - purity water by first using reverse osmosis to remove a significant portion of contaminants and then deionization to further purify the water. The quality of the input water can greatly affect the performance, efficiency, and lifespan of the system, as well as the quality of the output water.
General Water Quality Parameters
When considering the input water for a double RO DI water system, several key parameters need to be evaluated. These include total dissolved solids (TDS), hardness, pH, temperature, and the presence of certain contaminants such as chlorine, heavy metals, and microorganisms.
Total Dissolved Solids (TDS)
TDS refers to the total amount of inorganic and organic substances dissolved in water. A high TDS level in the input water can put additional stress on the RO membranes in the system. The RO membranes work by allowing water molecules to pass through while rejecting dissolved solids. If the TDS is too high, the membranes may become fouled more quickly, reducing their efficiency and lifespan. For most double RO DI water systems, an ideal TDS level in the input water should be below 500 ppm (parts per million). However, some systems can tolerate TDS levels up to 1000 ppm, but this may require more frequent membrane cleaning and replacement.
Hardness
Hardness is mainly caused by the presence of calcium and magnesium ions in water. These ions can form scale on the RO membranes, which can reduce the water flow rate and the efficiency of the system. The scale can also damage the membranes over time. A recommended hardness level for the input water of a double RO DI water system is less than 10 ppm as calcium carbonate equivalent. If the hardness is higher, a water softener can be installed as a pre - treatment step to remove the calcium and magnesium ions.
pH
The pH of the input water can also affect the performance of the RO membranes. Most RO membranes operate optimally within a pH range of 4 - 11. Outside this range, the membranes may be more prone to chemical degradation. If the pH of the input water is too low (acidic), it can cause corrosion of the system components. If it is too high (alkaline), it can lead to scale formation. Adjusting the pH of the input water to the appropriate range can help maintain the integrity and efficiency of the system.
Temperature
The temperature of the input water can impact the permeate flux (the rate at which water passes through the RO membranes). Generally, as the temperature increases, the water viscosity decreases, and the permeate flux increases. However, high temperatures can also accelerate the growth of microorganisms and increase the chemical reactivity of the contaminants in the water. The recommended temperature range for the input water of a double RO DI water system is typically between 5°C and 35°C.
Contaminants
Chlorine is a common disinfectant used in municipal water supplies. While it helps to kill microorganisms in the water, it can also damage the RO membranes. Therefore, the input water should have a chlorine level of less than 0.1 ppm. A carbon filter can be used as a pre - treatment step to remove chlorine from the water.
Heavy metals such as lead, mercury, and iron can also be present in the input water. These metals can damage the RO membranes and the ion - exchange resins in the DI unit. The input water should be tested for heavy metals, and appropriate pre - treatment methods such as filtration or chemical precipitation can be used to remove them.
Microorganisms such as bacteria, viruses, and fungi can grow in the water system and contaminate the output water. The input water should be relatively free of microorganisms. A pre - filtration step using a microfiltration or ultrafiltration membrane can be used to remove larger microorganisms before the water enters the RO system.
Different Water Sources and Their Suitability
Municipal Water
Municipal water is a common source of input water for double RO DI water systems. It usually has a relatively stable water quality, but it may contain chlorine, sediment, and dissolved solids. As mentioned earlier, a carbon filter can be used to remove chlorine, and a sediment filter can be used to remove larger particles. The TDS and hardness of municipal water can vary depending on the location. In some areas, the water may be very hard, requiring a water softener as pre - treatment.
Well Water
Well water can have a wide range of water quality. It may contain high levels of hardness, iron, and manganese. Iron and manganese can cause staining and fouling of the RO membranes. A pre - treatment system that includes an iron and manganese removal filter may be necessary. Additionally, well water may be contaminated with bacteria and other microorganisms, so a disinfection step such as ultraviolet (UV) treatment or chlorination followed by de - chlorination may be required.
Surface Water
Surface water, such as water from lakes and rivers, can be highly variable in quality. It may contain a large amount of sediment, organic matter, and microorganisms. A comprehensive pre - treatment system is usually required for surface water. This may include sediment filtration, coagulation and flocculation to remove organic matter, and disinfection to kill microorganisms.
Our Double RO DI Water Systems
At our company, we offer a range of double RO DI water systems to meet different customer needs. Our Master Touch - Q Series Deionized Water System is designed for high - purity water production in laboratory settings. It can handle input water with a relatively wide range of water qualities, but for optimal performance, it is recommended to follow the water quality guidelines mentioned above.
The Medium - RQ Series Deionized Water System is suitable for medium - scale applications. It is equipped with advanced RO membranes and ion - exchange resins to ensure high - quality output water. The system also has built - in sensors to monitor the water quality and performance, allowing for timely maintenance and adjustment.
Our Medium - Q Series Deionized Water System is another reliable option for various industrial and commercial applications. It is designed to be energy - efficient and easy to operate, with a focus on producing consistent high - purity water.
Importance of Pre - treatment
Pre - treatment of the input water is essential for the proper functioning of a double RO DI water system. By ensuring that the input water meets the recommended quality parameters, the system can operate more efficiently, with reduced maintenance requirements and longer component lifespan. A well - designed pre - treatment system can also improve the quality of the output water, which is crucial for applications such as laboratory research, pharmaceutical manufacturing, and electronics production.
Contact Us for Purchase and Consultation
If you are interested in our double RO DI water systems or need more information about the recommended water quality for the input of these systems, we encourage you to contact us. Our team of experts can provide detailed advice on pre - treatment options, system selection, and installation. We are committed to providing high - quality products and excellent customer service to meet your water purification needs. Whether you are a small laboratory or a large industrial facility, we have the right solution for you.


References
- Water Treatment Handbook, Third Edition, by Andrew S. Palmer and Peter M. Missenden.
- Reverse Osmosis and Nanofiltration Handbook, by Ronald W. McGovern.
- Deionization and Demineralization of Water, by American Water Works Association.




